Bullet Magnet: Britain's Most Highly Decorated Frontline Soldier
About this deal
Food We have over 50 years of experience in the food industry. Safely remove metals during food processing.
Easy-Clean Bullet Magnet - Greenwood Magnetics
Auto Shredding With our line of equipment you can attract and extract all metals from your recycling stream.Eriez ProGrade™ range is made up of various high quality Magnets, Metal Detectors and Vibratory equipment which are available for immediate despatch and at exceptionally low prices. Included in the range are Grate Magnets, Tube Magnets, Bullet Magnets, Magnetic Traps, Magnetic Drum, Hand Held Metal Detector, Pneumatic Vibrator and Vibratory Feeder Drives. As product flows past the powerful magnetic bullet (up to 12000 gauss), ferrous particles as small as 30 microns and tiny paramagnetic particles such as stainless steel scrapings are filtered out. These very fine ferrous and stainless steel particles are smaller than can be detected with a metal detector. Eriez Magnetics Europe Ltd will be present at RWM 2014, (16th - 18th September), at the NEC, Birmingham, to demonstrate new developments with its range of eddy current separators. This advanced equipment will enable waste processors to achieve an extremely high level separation of non-ferrous material from waste material fines.
Bullet Magnet - Leading Magnetic Equipment, Industrial Magnet Bullet Magnet - Leading Magnetic Equipment, Industrial Magnet
Eriez Magnetics Europe Ltd has given three young men from the local community mechanical and electrical apprenticeships. The fantastic opportunity will not only enable the new starters to gain a new set of skills and experience working life, but will also help develop a new generation at Eriez. Magnetic Drums - Permanent magnets for automatic separation of ferromagnetic and paramagnetic particles. As material reaches the Drum, the magnetic field attracts and holds ferrous particles to the Drum shell. As the Drum revolves, it carries the material through the stationary magnetic field. The non-magnetic material falls freely from the shell, while ferrous particles are held firmly until they are carried out of the magnetic field.
FIND THE PULL FORCE NOW
Flanges on the top and bottom of the Bullet Magnet enable easy installation into existing vertical pipelines and free-fall chutes which transport material. Bullet Magnets consist of a stainless steel housing with a maintenance door on which the magnet system is attached to, the magnet system is positioned in the centre of the housing and therefore in the middle of the free-falling product stream. A splitting cone distributes the material homogeneously over the cylindric magnet system. The magnet element is either made out of Neodymium Iron Boron or Strontium Ferrite depending on the application. Guide stripes within the housing ensure that the material is directed as close as possible to the surface of the magnet. Related Blogs Eriez Magnetics Europe Ltd has helped one of the largest scrap processors in Britain with the problem of damaging pieces of scrap metal affecting the day to day running of their yard.
In-Line Magnets | Bunting Pneumatic In-Line Magnets | Bunting
Recycling Bunting® is a one-stop source for recycling equipment used in material recovery facilities.The Inkjet Marker MK II is an accessory for adding to an existing Metal Detector system, used to mark the location of metal contamination detected on a conveyor belt. Due to the growth of the recycling and waste management industry, Eriez are continually designing new technology to further improve the separation of metal that recycling companies can achieve. Eriez metal sorters can remove ferrous, non-ferrous or both from the waste stream to ensure the high metal separation standards are met. They not only reduce the amount of metal going to landfill but also purify materials being recycled. An Eriez Model ‘T’ Magnetic Trap has been installed at Ahlstrom Corporation, a global leader in the development, manufacturing and marketing of high performance fibre based materials.